WEBINAR: ONE THING THIS SPRING
The XtremeAg team will each discuss a problem, solution, big idea, new technology, area of focus, or new methodology they’re implementing this spring. Our industry expert presenter will be Robb Dedman of Ultimate Ag Consulting. As usual, Robb and the XA guys will be accessible for questions, explanations, and deeper dives into the subject matter during this interactive event. Join us for insights and inspiration to make your farm prosper!
How To (Inexpensively!) Increase Your Combine’s Efficiency and Capture more Yield
Inside your combine there are a LOT of moving parts and some of those parts — specifically your machine’s concaves — might not be pulling their weight. What if an inexpensive change got you through harvest 25% faster, or allowed you to increase the size of your combine head — without changing out your combine? What if your combine’s concaves are losing a bushel per acre out the rear end of the machine? Or worse yet, grinding and splitting your crop or allowing too much foreign matter to end up in the hopper? Chances are, you don’t think a lot about the belly of your machine but you should. Chad Henderson discusses the benefits he’s seen on his Alabama farm since making the simple switch to the XPR2 Concaves by Estes Performance Concaves.
Chad's XPR2 Concaves Deliver in Wheat
Just finished with his 2021 wheat harvest, Chad talks about the productivity, grain samples and how easy it was to change the settings on his XPR2 concaves.
Being Equipped to Seize Opportunities
The marketplace is in constant motion. Weather events, foreign trade and production occurrences, crop reports, and other factors create opportunities for gains (and losses!). Seasoned farm operators understand the need to exploit higher returns when the marketplace allows an opportunity to do so. Matt Miles discusses his grain facility expansion and dryer addition. The upgrade creates grain handling efficiencies and this year it’s making him an extra dollar or so per bushel by selling into an inverted market.
Tale of the Tape: How did the XPR2 Concaves Stack up against the OEM's? Kevin Breaks it down
The XtremeAg team put the Estes XPR2 Concaves to the test last season. The initial "eye-test" results were impressive, but did they really outperform the OEMs enough to deliver a solid ROI? Kevin breaks it down with data from the 2020 barley, wheat, corn and soybean harvest.
2020 Member Webinar
It's the XtremeAg.farm member webinar where the team unveils results from various trials, discusses key learnings and insights from the 2020 season. Topics discussed include, foliar and starter fertilizer trials, population research, soybean desiccation, late season nitrogen applications, seed selection, tillage, fungicide, biologicals, boron, sulfur, fertility, and much more.
A 15 Inch Corn Head For The Derecho Devastation
Kelly Garrett saved the worst for last this harvest season but now he is about to face the devastation caused by the derecho in August as he prepares to combine the acres of corn that were flattened by the high winds and hail that came with the freak storm.
Chad Picks Up A Full Day in Harvest Efficiency with the XPR2 Concaves
Chad Henderson farms a lot of land in north Alabama and Georgia. So if he can run at the same speeds with a 16 row head that he can with his 12-row, then that means he will get back home a lot faster. Chad ran some tests on the XPR2 concaves and he shares the results.
Finding Your Combine's Grain Loss Trouble Areas
Grain loss can add up to money lost for farmers. There are a number of different areas on a combine where grain loss can occur. In This member video, Kevin performs a power-stop Loss check in his S680. He talks combine settings and shows us all of the different places he checks for grain loss starting with the area right under the head and moving back. Find the problem areas and keep that money in your pocket, not in your field.